manualshive.com logo in svg

H3C S6820 Series, Configuration Examples, Page: 18 / 48

Share
Download
H3C S6820 Series Configuration Examples Download Page 18

 

16 

[Sysname] 

%Jan  1 05:24:41:249 2019 H3C IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet2/0/10 link status 

is up.                                                               

%Jan  1 05:24:41:249 2019 H3C IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet2/0/10 is up.                                                

%Jan  1 05:24:41:325 2019 H3C IFNET/3/PHY_UPDOWN: HundredGigE2/0/29 link status is up.       

%Jan  1 05:24:41:325 2019 H3C IFNET/3/PHY_UPDOWN: HundredGigE2/0/30 link status is up.     

%Jan  1 05:24:46:266 2019 H3C IFNET/3/PHY_UPDOWN: M-GigabitEthernet0/0/0 link status is 

up.  

%Jan  1 05:24:46:268 2019 H3C IFNET/5/LINK_UPDOWN: Line protocol on the interface 

M-GigabitEthernet0/0/0 is up. 

The output shows that network connectivity of IRF 2 has been restored. 

# Remove all IRF 1 and IRF link failures. 

# After the link failure of IRF 1 is removed, the IRF ports recover. The following is the sample output 
on IRF 1: 

%Jan  1 05:29:06:913 2019 H3C IFNET/3/PHY_UPDOWN: HundredGigE1/0/27 link status is up.            

%Jan  1 05:29:06:914 2019 H3C IFNET/5/LINK_UPDOWN: Line protocol on the interface 
HundredGigE1/0/27 is up.                                               

%Jan  1 05:29:06:913 2019 H3C IFNET/3/PHY_UPDOWN: HundredGigE1/0/28 link status is up.            

%Jan  1 05:29:06:914 2019 H3C IFNET/5/LINK_UPDOWN: Line protocol on the interface 
HundredGigE1/0/28 is up.                                               

%Jan  1 05:29:07:106 2019 H3C STM/6/STM_LINK_STATUS_UP: IRF port 2 is up.        

%Jan  1 05:29:07:810 2019 H3C STM/4/STM_LINK_RECOVERY: Merge occurs. 

IRF 2 reboots automatically to merge with IRF 1. 

# Verify that the IRF fabric is recovered with Device A as the master. 

<IRF> display irf 

MemberID    Role    Priority  CPU-Mac         Description 

 *+1        Master  31        00e0-fc0f-8c02  --- 

   2        Standby 1         00e0-fc0f-8c03  --- 

   3        Standby 1         00e0-fc0f-8c04  --- 

   4        Standby 1         00e0-fc0f-8c05  --- 

-------------------------------------------------- 

 * indicates the device is the master. 

 + indicates the device through which the user logs in. 

 

 The Bridge MAC of the IRF is: 0cda-414a-859b 

 Auto upgrade                : yes 

 Mac persistent              : 12 min 

 Domain ID                   : 1 

Configuration files 

•

 

IRF fabric at the access layer: 

# 

sysname IRF 

# 

 irf domain 1 

 irf member 1 priority 31 

Summary of Contents for S6820 Series

















































Reviews:

No comments