manualshive.com logo in svg

H3C S6820 Series, Configuration Examples, Page: 13 / 48

Share
Download
H3C S6820 Series Configuration Examples Download Page 13

 

11 

[IRF] interface bridge-aggregation 2 

[IRF-Bridge-Aggregation2] link-aggregation mode dynamic 

[IRF-Bridge-Aggregation2] mad enable 

You need to assign a domain ID (range: 0-4294967295) 

[Current domain is: 1]: 

The assigned domain ID is: 1 

[IRF-Bridge-Aggregation2] quit 

# Create a named interface range that contains uplink ports to the distribution layer IRF fabric. 
In this example, the interface range name is 

lacp

, and each member device has two links to the 

distribution layer IRF fabric. 

[IRF] interface range name lacp interface hundredgige 1/0/29 to hundredgige 1/0/30 

hundredgige 2/0/29 to hundredgige 2/0/30 hundredgige 3/0/29 to hundredgige 3/0/30 

hundredgige 4/0/29 to hundredgige 4/0/30 

# Assign the ports in the interface range to Bridge-Aggregation 2. 

[IRF-if-range-lacp] port link-aggregation group 2 

[IRF-if-range-lacp] quit 

2. 

Configure the IRF fabric at the distribution layer: 

# Assign IRF domain ID 2 to the IRF fabric. 

<Sysname> system-view 

[Sysname] irf domain 2 

# Create Bridge-Aggregation 2, set its aggregation mode to dynamic, and enable LACP MAD. 

[Sysname] interface bridge-aggregation 2 

[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic 

[Sysname-Bridge-Aggregation2] mad enable 

You need to assign a domain ID (range: 0-4294967295) 

[Current domain is: 2]: 

The assigned domain ID is: 2 

[Sysname-Bridge-Aggregation2] quit 

# Assign the downlink ports that connect to the access-layer IRF fabric to Bridge-Aggregation 2. 

[Sysname] interface hundredgige 1/2/0/1 

[Sysname-HundredGigE1/2/0/1] port link-aggregation group 2 

[Sysname-HundredGigE1/2/0/1] quit 

[Sysname] interface hundredgige 1/3/0/1 

[Sysname-HundredGigE1/3/0/1] port link-aggregation group 2 

[Sysname-HundredGigE1/3/0/1] quit 

[Sysname] interface hundredgige 2/2/0/1 

[Sysname-HundredGigE2/2/0/1] port link-aggregation group 2 

[Sysname-HundredGigE2/2/0/1] quit 

[Sysname] interface hundredgige 2/3/0/1 

[Sysname-HundredGigE2/3/0/1] port link-aggregation group 2 

[Sysname-HundredGigE2/3/0/1] quit 

[Sysname] interface hundredgige 3/2/0/1 

[Sysname-HundredGigE3/2/0/1] port link-aggregation group 2 

[Sysname-HundredGigE3/2/0/1] quit 

[Sysname] interface hundredgige 3/3/0/1 

[Sysname-HundredGigE3/3/0/1] port link-aggregation group 2 

[Sysname-HundredGigE3/3/0/1] quit 

[Sysname] interface hundredgige 4/2/0/1 

Summary of Contents for S6820 Series

















































Reviews:

No comments