1-4
z
The S5820X-28S provides two power module slots on its rear panel. Hot swappable power module
slot 1 is empty when the switch is shipped, and hot swappable power module 2 is installed with a
filler panel. The above figure illustrates a switch with two PSR300-12A AC power modules.
z
You can select one or two power modules for your switch as needed. See
Hot Swappable Power
Modules
on page
1-13
for the power module models supported by the S5820X-28S, and see
Installing a Power Module
on page
3-12
for the installation of power modules. See
H3C
PSR300-12A & PSR300-12D1 Power Module User Manual
for the detailed description of the
power modules.
S5820X-28C
Front Panel
Figure 1-3
S5820X-28C front panel
(1) Interface card
(2) Seven-segment LED
(3) Port mode LED
(4) System status LED (SYS)
(5) Hot swappable power module 1 LED
(PWR1)
(6) Hot swappable power module 2 LED (PWR2)
(7) OAP card status LED (SLOT3)
(8) Port mode LED switching button
(9) USB interface
(10) Console port
(11) 10/100/1000Base-T auto-sensing
Ethernet port
(12) 10/100/1000Base-T auto-sensing Ethernet
port status LED
(13) SFP+ interface
(14) SFP+ interface status LED
Summary of Contents for S5820X-28C
Page 84: ...6 6 z Emulation VT100 ...
