4-7
Item
Description
6. Enter BootRom upgrade menu
Enter the Boot ROM update menu
7. Skip current configuration file
Skip the current configuration file (this configuration is valid
once)
8. Set BootRom password recovery Restore the Boot ROM password
9. Set switch startup mode
Set the startup mode of the switch
0. Reboot
Restart the switch
z
If you perform no operation or press a key other than
Ctrl
+
B
within one second, once the
remaining waiting time becomes zero, the system begins to automatically start up and the following
information is displayed:
Starting to get the main application file--flash:/S5810_RELEASE.bin!...........
.........................................................
The main application file is self-decompressing................................
...............................................................................
..........................................Done!
System is starting...
Board checking.....................................LSW158150S
Switch chip selftest......................................OK!
SDRAM fast selftest.................................NOT TEST!
Flash fast selftest.......................................OK!
PHY selftest..............................................OK!
CPLD selftest.............................................OK!
Please check port leds..............................finished!
The switch Mac is: 00E0-FC00-5810
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
completed.
Press
Enter
. The following prompt is displayed:
<H3C>
You can configure the switch now.
The H3C Series switches provide abundant command views. For detailed descriptions about the
configuration commands and CLI, refer to
H3C S5810 Series Ethernet Switches Operation Manual
and
H3C S5810 Series Ethernet Switches Command Manual
.
