4-3
Figure 4-3
Connection description of HyperTerminal
4) Type the name of the new connection in the connection description interface and click
OK
. The
following interface pops up. Select the serial port to be used from the
Connect using
drop-down
list.
Figure 4-4
Set the serial port used by the HyperTerminal connection
5) Click
OK
after selecting a serial port and the following interface pops up. On the interface, set
Bits
per second
to
9600
,
Data bits
to
8
,
Parity
to
None
,
Stop bits
to
1
, and
Flow control
to
None
.
