Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-77
maximum number of transmission attempts is reached (in this case, it discards the
request).
Related command:
reset stop-accounting-buffer
,
hwtacacs scheme
,
display
stop-accounting-buffer
.
Example
# Enable the switch to buffer the stop-accounting requests that bring no response from
the servers in HWTACACS scheme hwt1.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
1.3.18 timer quiet
Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Parameter
minutes
: Length of the timer in minutes, in the range of 1 to 255. By default, the primary
server must wait five minutes before it resumes the active state.
Description
Use the
timer quiet
command to set the duration that a primary server must wait
before it can resume the active state.
Use the
undo timer quiet
command to restore the default (five minutes).
Related command:
display hwtacacs
.
Example
# Set the quiet timer for the primary server to ten minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
