Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-45
Related command:
nas-ip
.
Example
# Set the source IP address used by the switch to send the RADIUS packets to
129.10.10.1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius nas-ip 129.10.10.1
1.2.14 radius scheme
Syntax
radius scheme
radius-scheme-name
undo radius scheme
radius-scheme-name
View
System view
Parameter
radius-scheme-name
: Name of the RADIUS scheme, a character string of up to 32
case-insensitive characters.
To avoid the case where the
display radius statistics
command is shown in a fuzzy
matching manner when you enter the
display radius
keywords, you are not
recommended to define
radius-scheme-name
as “statistics” or the first several
characters.
Description
Use the
radius scheme
command to create a RADIUS scheme and enter its view.
Use the
undo radius scheme
command to delete the specified RADIUS scheme.
By default, a RADIUS scheme named "system" has already been created in the
system.
Note that:
z
All the attributes of the RADIUS scheme "system" take the default values, which
you can see by using the
display radius scheme
command.
z
The RADIUS protocol configuration is performed on a RADIUS scheme basis. For
each RADIUS scheme, you should specify at least the IP addresses and UDP port
numbers of the RADIUS authentication/authorization and accounting servers, and
the parameters required for the RADIUS client to interact with the RADIUS
servers.
z
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
