Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-59
Number of users
Real-time accounting interval
ú
1000
ú
15
Related command:
retry realtime-accounting
and
radius scheme
.
Example
# Set the real-time accounting interval of the RADIUS scheme radius1 to 51 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer realtime-accounting 51
1.2.29 timer response-timeout
Syntax
timer response-timeout
seconds
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds
: Response timeout time of RADIUS servers, ranging from 1 second to 10
seconds.
Description
Use the
timer response-timeout
command to set the response timeout time of
RADIUS servers.
Use the
undo timer response-timeout
command to restore the default response
timeout timer of RADIUS servers.
By default, the response timeout time of the RADIUS server is 3 seconds.
Note that:
z
If the switch gets no response from the RADIUS server after sending out a
RADIUS request (authentication/authorization request or accounting request) and
waiting for a time, it should retransmit the packet to ensure that the user can obtain
the RADIUS service. This wait time is called response timeout time of RADIUS
servers; and the timer in the switch system that is used to control this time is called
the response timeout timer of RADIUS servers. You can use the
timer
response-timeout
command to set the timeout time of this timer.
