Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-55
Use the
undo server-type
command to restore the default RADIUS server type
supported by the switch.
By default, the switch supports the standard type of RADIUS server. The type of
RADIUS server in the default RADIUS scheme "system" is
extended
.
Related command:
radius scheme
.
Example
# Set the RADIUS server type in RADIUS scheme radius1 to extended.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] server-type extended
1.2.25 state
Syntax
state
{
primary
|
secondary
} {
accounting
|
authentication
} {
block
|
active
}
View
RADIUS scheme view
Parameter
primary
: Specifies the server to be set is a primary RADIUS server.
secondary
: Specifies the server to be set is a secondary RADIUS server.
accounting
: Specifies the server to be set is a RADIUS accounting server.
authentication
: Specifies the server to be set is a RADIUS
authentication/authorization server.
block
: Sets the status of the specified RADIUS server to
block
(that is, the down state).
active
: Sets the status of the specified RADIUS server to
active
(that is, the normal
working state).
Description
Use the
state
command to set the status of a RADIUS server.
By default, all the RADIUS servers in a user-defined RADIUS scheme are in the active
state;
For the primary and secondary servers (authentication/authorization servers, or
accounting servers) in a RADIUS scheme, note that:
