29
Figure 21
Attaching front mounting brackets and load-bearing screws
(1) Load-bearing screw
(2) Optional positions for load-bearing screw
(3) Front panel
(4) Front mounting bracket
(5) Screw used to attach front mounting brackets to the switch
NOTE:
The switch provides three positions (except the S5500-28F-EI, which provides two positions) to mount a
load-bearing screw on both sides. Select a proper position according to the actual requirements. The rear
mounting brackets tightly contacted with the load-bearing screws can support the switch.
5.
Select a position to install the switch and attach the rear mounting brackets to the rear posts with
screws and cage nuts, as shown in
.
Figure 22
Attaching rear mounting brackets
(1) Rear square-holed post
(2) Rear mounting bracket
6.
Support the bottom of the switch with one hand and the front part of the switch with the other hand,
and push the switch into the rack gently, as shown in
.
(5)
(1)
(2)
(4)
(3)
