1-3
Configuring Basic SNMP Functions
SNMPv3 configuration is quite different from that of SNMPv1 and SNMPv2c. Therefore, the
configuration of basic SNMP functions is described by SNMP versions, as listed in
Table 1-2
and
Table
1-3
.
Table 1-2
Configure basic SNMP functions (SNMPv1 and SNMPv2c)
Operation
Command
Description
Enter system view
system-view
—
Enable SNMP agent
snmp-agent
Optional
Disabled by default.
You can enable SNMP
agent by executing this
command or any of the
commands used to
configure SNMP agent.
Set system information, and specify
to enable SNMPv1 or SNMPv2c on
the switch
snmp-agent sys-info
{
contact
sys-contact
|
location
sys-location
|
version
{ {
v1
|
v2c
|
v3
}* |
all
} }
Required
By default, the contact
information for system
maintenance is "R&D
Hangzhou, H3C
Technology Co., Ltd.", the
system location is
"Hangzhou China", and the
SNMP version is SNMPv3.
Direct
configura
tion
Set a
community
name
snmp-agent community
{
read
|
write
}
community
-
name
[
acl
acl-number
|
mib-view
view-name
]*
Set an
SNMP
group
snmp-agent group
{
v1
|
v2c
}
group-name
[
read-view
read-view
] [
write-view
write-view
] [
notify-view
notify-view
] [
acl
acl-number
]
Set a
community
name and
access
permission
Indirect
configura
tion
Add a user
to an
SNMP
group
snmp-agent usm-user
{
v1
|
v2c
}
user-name
group-name
[
acl
acl-number
]
Required
z
You can set an
SNMPv1/SNMPv2c
community name
through direct
configuration.
z
Indirect configuration is
compatible with
SNMPv3. The added
user is equal to the
community name for
SNMPv1 and
SNMPv2c.
z
You can choose either
of them as needed.
Set the maximum size of an SNMP
packet for SNMP agent to receive or
send
snmp-agent packet
max
-
size
byte
-
count
Optional
1,500 bytes by default.
Set the device engine ID
snmp-agent local
-
engineid
engineid
Optional
By default, the device
engine ID is “enterprise
device
information”.
Create/Update the view information
snmp-agent mib
-
view
{
included
|
excluded
}
view
-
name
oid
-
tree
[
mask
mask-value
]
Optional
By default, the view name
is “ViewDefault” and OID is
1.
Summary of Contents for S3100 Series
