23
Caution:
z
Never move the power module by its handles.
z
When releasing the handles, do not use excessive
force.
z
When inserting the power module into the RPS
chassis, make sure that the handles are unlocked.
z
Upon inserting the power module into the chassis,
push the handles into their slots to secure the
power module in place.
3.3.2 Installing the Flatpack 1500
Follow these steps to install a power module:
Step 1: Release both handles of the power
module with the supplied screwdriver, and make sure
that the handles have completely projected from their
slots, as shown in Figure 9 .
Step 2: With both hands holding the handles,
gently push the power module into the chassis.
Step 3: Press the handles into their slots to lock
the power module in place.
3.3.3 Removing the Flatpack 1500
Follow these steps to remove a power module:
Step 1: Release both handles of the power
module with the supplied screwdriver, as shown in
Figure 9 .