13
z
Keep the RPS unit away from any heavy-duty
radio transmitter, radar transmitter, and
high-frequency devices working in high
current. Take electromagnetic shielding
measures if necessary.
z
Make sure that the operating voltage of the
power source matches the voltage required
by the device.
z
Interface cables must be routed indoors.
Otherwise, over-voltage and over-current
may damage the device. As for power cables
from the outside of the building, you may add
a dedicated lightening arrester at the input
end of the cable.
z
To enhance lightening protection, you may
need to add a power lightening arrester at the
input end.
z
Wear an ESD-preventive wrist strap when
installing the RPS unit, and make sure that
the wrist strap has good skin contact.
z
To avoid electric shock, NEVER open the
chassis of the RPS unit while it is in operation;
try not to open the RPS unit even if it is not
electrified.
z
Unplug the power cord before cleaning the
RPS unit.