10
1.
Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
Figure 8 Attaching rubber feet to the router
2.
Place the router upside up on the workbench. Make sure the rubber feet stand securely on the
workbench.
Figure 9 Mounting the router on a workbench
Installing the router on a wall
CAUTION:
Make sure the port side of the router is on the top and is parallel to the floor.
To install the router on a wall:
1.
Determine and mark the locations of the mounting holes on the wall, and drill four 22 mm (0.87
in) diameter holes at the mounting hole locations you marked.
2.
Insert a wall anchor into each hole, and tap the wall anchor with a hammer until it is all flush with
the wall surface.
