7
(1) Connect the female connector of the power cord to the power input receptacle
on the power supply.
将电源线带插孔的一端插到电源模块的输入插口上。
(2) Use a cable tie to secure the power cord to the handle of the power supply.
用
可拆卸式扎带将电源线固定到电源模块的拉手处，以防电源线脱落。
5. Removing the power supply
拆卸电源模块
•
To avoid bodily injury or switch damage, strictly follow the procedure
described in this section to remove the power supply.
请严格按照如下
操作顺序拆卸电源模块，否则可能会造成设备损坏或者人身伤害。
•
If you are not to install a new power supply after removing the old one,
install a filler panel in the slot in time.
如果该电源插槽中不再安装电源模
块，请将假面板安装到该插槽上，以免灰尘进入机箱。
