H3C MSR 2600 Series, Configuration Manual

Page: 55 / 288

40
If you specify gateways in both address pool view and secondary subnet view, DHCP assigns the
gateway addresses in the secondary subnet view to the clients on the secondary subnet. If you specify
gateways in address pool view but not in secondary subnet view, DHCP assigns the gateway addresses
in address pool view to the clients on the secondary subnet.
To configure gateways in the DHCP address pool:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name N/A
3. Specify gateways.
gateway-list ip-address &<1-8>
By default, no gateway is
specified.
4. (Optional.) Enter secondary
subnet view
network network-address [ mask-length |
mask mask ] secondary
N/A
5. (Optional.) Specify gateways.
gateway-list ip-address &<1-8>
By default, no gateway is
specified.
Specifying a domain name suffix for the client
You can specify a domain name suffix in a DHCP address pool on the DHCP server. With this suffix
assigned, the client only needs to input part of a domain name, and the system adds the domain name
suffix for name resolution. For more information about DNS, see "Configuring IPv4 DNS."
To configure a domain name suffix in the DHCP address pool:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool view.
dhcp server ip-pool pool-name N/A
3. Specify a domain name suffix.
domain-name
domain-name
By default, no domain name is
specified.
Specifying DNS servers for the client
To access hosts on the Internet through domain names, a DHCP client must contact a DNS server to
resolve names. You can specify up to eight DNS servers in a DHCP address pool.
To specify DNS servers in a DHCP address pool:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool view.
dhcp server ip-pool pool-name N/A
3. Specify DNS servers.
dns-list ip-address &<1-8>
By default, no DNS server is
specified.