124
Step Command
Remarks
3.
Configure one or
more common
NAT Server
mappings.
•
A single global address with a single or no global port:
nat server protocol
pro-type
global
{
global-address
|
current-interface
|
interface
interface-type
interface-number
}
[
global-port
] [
vpn-instance
global-name
]
inside
local-address
[
local-port
]
[
vpn-instance
local-name
] [
acl
acl-number
]
•
A single global address with consecutive global ports:
nat server protocol
pro-type
global
{
global-address
|
current-interface
|
interface
interface-type
interface-number
}
global-port1 global-port2
[
vpn-instance
global-name
]
inside
{ {
local-address
|
local-address1 local-address2
}
local-port
|
local-address
local-port1
local-port2
} [
vpn-instance
local-name
] [
acl
acl-number
]
•
Consecutive global addresses with a single or no global
port:
nat server protocol
pro-type
global
global-address1
global-address2
[
global-port
] [
vpn-instance
global-name
]
inside
{
local-address
|
local-address1
local-address2
}
[
local-port
] [
vpn-instance
local-name
]
[
acl
acl-number
]
•
Consecutive global addresses with a single global port:
nat server protocol
pro-type
global
global-address1
global-address2 global-port
[
vpn-instance
global-name
]
inside
local-address
local-port1
local-port2
[
vpn-instance
local-name
] [
acl
acl-number
]
By default, no NAT
Server mapping
exists.
You can configure
multiple NAT Server
mappings on an
interface.
Configuring load sharing NAT Server
You can add multiple internal servers to an internal server group so that these servers provide the same
service to external hosts. The NAT device chooses one internal server as the destination server based on
the weight and number of connections of the servers when an external user sends application requests to
the external address of the internal server group.
To configure load sharing NAT Server:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure a NAT Server
group and enter its view.
nat server-group
group-number
By default, no NAT Server
group exists.
3.
Add an internal server
into the group.
inside ip
inside-ip
port
port-number
[
weight
weight-value
]
By default, no internal
server is in the group.
You can add multiple
internal servers to a
group.
4.
Enter interface view.
interface
interface-type interface-number
N/A
Summary of Contents for MSR 2600 Series
Page 6: ...We appreciate your comments...
Page 33: ...18 AC vlan1 quit...
Page 118: ...103...
