20
Item
Specification
Interface speed
155.52 Mbps
The Ethernet fiber ports of the HIM-4G4P support 1000 Mbps SFP fiber transceiver modules and
1000 Mbps SFP copper transceiver modules. The POS interfaces support 155 Mbps SFP fiber
transceiver modules.
The transceiver modules are optional.
Interface cables
The HIM-4G4P is used together with SFP transceiver modules and fibers with LC connectors.
For the appearance and connection of a HIM-4G4P interface cable, see "
."
HIM-TS8P
The HIM-TS8P provides 8 ports, each of which can be switched between a POS interface and an
Ethernet port. A POS interface transmits data at OC-3/STM-1 (155.52Mbps) or OC-12/STM-4
(622Mbps). An Ethernet port transmits data at 1000 Mbps. The HIM-TS8P is half the height of a HIM,
and occupies one slot on a FIP.
To switch the interface type of a HIM-TS8P, use the
port-type switch
command.
To switch the POS interface speed of a HIM-TS8P, use the
speed
command in POS interface view.
For more information about the
port-type switch
and
speed
commands, see
H3C
SR6600/SR6600-X Routers Interface Command Reference
.
Front panel
Figure 18 Front panel
(1) Captive screw
(2) SFP port
(3) Ejector lever
(4) SFP port carrier signal LED (LINK/ACT)
LEDs
Table 24 LED description
LED
Status
Description
SFP
GE-1000BASE
-X
LINK/ACT
(Green)
Off
No link is present.
On
A 1000 Mbps link is present.
Flashing
Data is being transmitted or received at 1000
Mbps.
SFP
POS-155M/PO
LINK/ACT/LP/
AL
Steady green
A 155.52/622 Mbps link is present.
Flashing green
Data is being transmitted or received.
1
2
4
3
