3-1
3
Installing the Access Controller Module
z
Always wear a well grounded ESD-preventive wrist strap when installing or removing the access
controller module.
z
After removing the blank filler panel from the slot where the access controller module is to be
installed, keep it properly for future use.
Console Cable Connection
Introduction to the Console Cable
As shown in Figure 3-1, the console cable is an 8-core cable with an RJ-45 connector at one end for the
console port of the LSQM1WCMB0 and a DB-9 female connector at the other end for the 9-pin serial
port of a configuration terminal.
Figure 3-1
Console cable
W
B
Pos.8
Pos.1
B
A
Pos.9
Pos.1
A
(1)
(2)
(3)
(1) DB-9 connector
(2) Main label
(3) RJ-45 connector
Table 3-1
Console cable pinouts
RJ-45
Signal
Direction
DB-9 (Modem)
DB-9 (Console)
1 RTS
→
7 8
2 DTR
→
4 6
3 TXD
→
3 2
4 DCD
←
1 5
5 GND
— 5 5
6 RXD
←
2 3
