18
Figure2-15 GE SFP copper transceiver module
Figure2-16 GE SFP transceiver module
Figure2-17 10GE SFP+ transceiver module
Figure2-18 QSFP+ transceiver module with an MPO port
Figure2-19 QSFP+ transceiver module with an LC port
To connect the firewall to the network through an optical fiber:
1.
Remove the dust plug from the fiber port.
2.
Pull the bail latch on the transceiver module upwards. Skip this step if the bail latch is plastic.
Then correctly orient the transceiver module.
3.
Taking the transceiver module by its two sides, push the transceiver module gently into the port
until you feel it snap into place.
