19
4.
Remove the dust plug and dust cap from the transceiver module and fiber connector,
respectively. Then clean the end face of the fiber connector.
5.
Connect the optical fiber to the transceiver module.
LC connector
—Align the connector with the transceiver module and push the connector
into the transceiver module slightly until it clicks into place.
MPO connector
—Orient the connector with the white dot on it facing right. Insert the
connector horizontally into the transceiver module. Push the connector into the transceiver
module slightly until it clicks into place.
6.
Use cable ties to bind the optical fiber every 150 mm (5.91 in).
7.
Affix cable labels to the optical fiber as required.
Figure2-20 Installing a transceiver module and optical fiber (LC connector)
Figure2-21 Installing a transceiver module and optical fiber (MPO connector)
