2-14
Figure2-12 Connecting an AC power cord (using a removable cable tie)
Installing MPUs
CAUTION:
•
The router supports active/standby MPU switchover when you install two MPUs for the router.
For the standby MPU to operate correctly, make sure the active and standby MPUs are the same
model.
•
If you are not to install an MPU in an MPU slot, keep the filler panel in the slot.
The router has two MPU slots. You can install one MPU, or two MPUs in 1+1 redundancy for the
router.
To install an MPU:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2.
Remove the filler panel from the target MPU slot.
