OPERATION
Precautions during installation
1. Confirm your electrical outlet is 110V
2. Make sure to use an individual outlet for the appliance
Caution:
* If the power cord is damaged, replace it in mediately
* Children should not use the appliance without supervision
* If the water pressure exceeds 60 PSI, use a pressure reducing valve.
Procedure
for
Operation
1. Install pinch valve to water source (see page 1)
(Do not connect pinch valve or adapter to hot water source)
2. Connect water line by pushing tube in to inlet on the back of the unit
3. Turn on the water supply
4. Wait at least 5 mintues and then make sure there is water in both tanks
5. Plug in the appliance in to a 110V electrical outlet
6. Turn on both the Hot and Cold switches, located on the back of
the machine
(Do not turn on the hot water switch before making sure there is
water in the tank)
7. Wait up to 50 minutes for cold water to cool and 20 minutes for
hot water to heat
8. If unit will not be used for a long period of time, drain the unit
using the drain cap located in the back of the unit and unplug it.
Hot Water Indicator Light
Cold Water Indicator Light
Hot Water Dispenser
Cold Water Dispenser
I
I
Cold Water Tap
Hot Water Tap
�
-
H 2 0 - 5 0 0 B O T T L E L E S S W A T E R C O O L E R I N S T A L L A T I O N & O W N E R S M A N U A L
Pure n Natural Systems, Inc. | purennatural.com | 1-800-237-9199
