14
Dust Collection
It is strongly recommended this planer be
connected to a dust extraction system, via the
5”(125mm) dust port at the rear of the planer. Your
dust collector should have at least 1500 CFM
capacity. And The required air flow speed at the end
of flexible hose is 30-34m/sec.
The dust extraction system shall be earthed.
After prolonged use of the planer,
the
cast iron
frame and areas
around the cutterhead may be hot.
Damage to your eyes, lungs and
ears could result from failure to
wears safety glasses, a respirator,
and hearing protection while using
this machine
