manualshive.com logo in svg

h/p/cosmos 190/65 3p, Operating And Service Manual

The "h/p/cosmos 190/65 3p" is a cutting-edge fitness equipment designed for ultimate performance. Enhance your workouts with this innovative product which comes with an Original Instruction manual. Easily download your free manual from manualshive.com, empowering you to maximize your training experience and achieve optimal results.

Share
Download
background image

maintenance and safety inspections 

file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc 

© 2013 h/p/cosmos sports & medical gmbh     author: fh     [email protected]     created 07.02.2013     printed 04.03.2013     page: 108 of 197 

 

8

 

Maintenance and safety inspections 

 

N

 

Maintenance and repair of the devices (also opening the device) are to be performed only by 
service engineers authorized and certified by h/p/cosmos, preferably within the scope of a 
maintenance contract. 

N

 

In case of a detected and/or assumed malfunction and/or defects and/or unreadable safety labels, 
the device is to be disengaged immediately. Mark the device and ensure that it cannot be 
operated. Inform the supplier and authorized service personnel in writing immediately. 

N

 

Disregarding warnings, notifications of intended and forbidden use, precautions as well as 
unauthorized or lack of maintenance and/or regular safety checks may lead to injuries or death 
and/or can damage the device. Furthermore it will result in loss of any liability and warranty. 

N

 

Before intervention in the device, for safety reasons, switch the running machine off and pull the 
mains plug. 

N

 

During all maintenance work and safety tests make sure that no third parties are directly or 
indirectly in contact with the device under test and/or the technician performing the test. Keep a 
safety zone of 2 m radius clear.

 

 
Some running machine models are not equipped with a UserTerminal. For these models an additional keyboard or an 
external UserTerminal for remote control via RS232 is available as an option (see chapter entitled “Accessories”). For 
maintenance and diagnosis we recommend the use of PC software h/p/cosmos para control

®

 

Download: 

www.h-p-cosmos.com/en/software/para_control.htm

 

 

8.1

 

Preventive maintenance 

 

The h/p/cosmos authorised service engineers are happy to help you in case problems occur. 
Preventive maintenance can prevent future problems and is indispensable for the safety of technical devices. Therefore, ask 
our service department for an annual preventive maintenance contract, which is highly recommended by the manufacturer. 
Some basic regular maintenance and regular safety checks as stipulated in the following chapters are obligatory! 

Before switching the device on the user always has to check visually: 

 

N

 

the circuit cable 

N

 

plugs 

N

 

outlet socket 

N

 

circuit entry of the device 

N

 

accessories such as harnesses and cables where applicable and available 
 

8.2

 

Immediate maintenance 

 

Immediate maintenance is necessary if: 

N

 

the device has been under high mechanical stress (push, power supply cable and/or interface cable defect through 
driving over it or pulling it) 

N

 

fluid has entered the device 

N

 

cable and/or connector plug have been damaged 

N

 

coverings and/or safety warnings have fallen off / broken 

N

 

connections made of rubber show cracks (mainly the running belt and the drive belt) 

N

 

the running belt does not run concentrically 

N

 

the running belt is not well-lubricated 

N

 

a defect or malfunction of the device has been detected or is suspected. 

Only a properly and regularly serviced device is safe. 

Summary of Contents for 190/65 3p






































































































































































































Reviews:

No comments

Related manuals for 190/65 3p

GBC AIO Quick Start Manual preview
AIO
Brand: GBC Pages: 8
KAPSCH T600 Operator And Maintenance Manual preview
T600
Brand: KAPSCH Pages: 57
Bacharach Fyrite Tech 50 Operating And Maintenance Instructions Manual preview
Fyrite Tech 50
Brand: Bacharach Pages: 48
XM Fitness XM100 Manual preview
XM100
Brand: XM Fitness Pages: 10
Hach MET ONE 3400 Series User Manual preview
MET ONE 3400 Series
Brand: Hach Pages: 48
Ultraflex K65 Installation Instructions preview
K65
Brand: Ultraflex Pages: 3
KCI ActiV.A.C. Quick Reference Manual preview
ActiV.A.C.
Brand: KCI Pages: 2
KCI ActiV.A.C. International User Manual preview
ActiV.A.C.
Brand: KCI Pages: 60
Landoll 7833 Operator'S Manual preview
7833
Brand: Landoll Pages: 38
Mac Medical SS32 Instruction Manual preview
SS32
Brand: Mac Medical Pages: 23
SCHUNK PWG 130 Repair Instructions preview
PWG 130
Brand: SCHUNK Pages: 2
Life Fitness Integrity CLSS Operation Manual preview
Integrity CLSS
Brand: Life Fitness Pages: 45
Reece VADA TWIN MOTOR MACERATOR Manual preview
VADA TWIN MOTOR MACERATOR
Brand: Reece Pages: 7
JTECH Medical DUALER IQ PRO Quick Start Manual preview
DUALER IQ PRO
Brand: JTECH Medical Pages: 8
Synthetic Sound Labs SSL 3650 Manual preview
SSL 3650
Brand: Synthetic Sound Labs Pages: 12
Skytrofa Auto-Injector Instructions For Use Manual preview
Auto-Injector
Brand: Skytrofa Pages: 35
Hammer 10417 Manual preview
10417
Brand: Hammer Pages: 21
Turner Designs TD-700 Operating Manual preview
TD-700
Brand: Turner Designs Pages: 55

Brands by name

Popular brands

Load more brands