P-51 'GALLOPING GHOST'
H-KING'S 1016MM SPAN, PLUG & FLY SPORTS-SCALE HOT ROD!
i
A. Horizontal stabilizer installation.
0
Prepare the parts shown below.
0
0
Slide the horizontal tail into opening at the rear of the fuselage (A) noting to match the
alignment keys on the tail with the alignment slots in the fuselage (B). It can be a little tight,
so dry fit first and pull the fuselage slot open a little to help if needed (C). Before you push
the tail into its final centered position apply a small amount of foam glue to the tail before
pushing finally into place (D). With the tail in position, check it is centered to the fuselage,
the keys on the tail will ensure its aligned to the wing (E).
Aligment keys
