ELECTRO FREEZE Model CS600
20
184596
12 Routine Maintenance
1. Disassemble, wash, rinse, sanitize,
air-dry, reassemble and sanitize all parts
which come into contact with the mix.
CAUTION
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so could
create a health hazard.
2. Clean the cylinder, cylinder inlet
tubes and drain tube with the appropriate
brushes.
Electro Freeze
recommends the following schedule to help maintain your Model CS600
freezer in like-new operating condition. Take the time to learn and perform these routine
procedures and receive in return many years of valuable service from your freezer. Protect
your investment!
1. Carefully inspect all parts for wear,
including scraper blades and beater shaft.
Replace as required.
3. When cleaning, inspect all
seals and O-rings. Replace any O-
ring or seal that is worn, torn, or
loose-fitting.
4. Wipe all exterior surfaces of
the freezer to remove any splattered
mix.
5. Check overrun and tempera-
ture of the product.
DAILY
WEEKLY
