7
GYSFLASH 1.12 PL
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety.
Please read it carefully before using the device for the first time and
keep it for future reference.
Read and understand the following safety instructions before use.
Any modification or updates that are not specified in the instruction’s
manual should not be undertaken.
The manufacturer is not liable for any injury or damage due to non-
compliance with the instructions featured in this manual. If there is
any issue or uncertainty, please consult a qualified individual to
operate the equipment correctly.
This machine should only be used for charging operations specified
within the limits indicated on the machine and in the instruction
manual. The operator must observe the safety precautions. In case
of improper or unsafe use, the manufacturer cannot be held liable.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack of
experience or knowledge, if they are properly monitored or if
instructions for using the equipment have safely been read and risks
made aware of. Children must not play with the product. Cleaning
and maintenance should not be performed by an unsupervised
child.
Do not use to charge domestic batteries or non rechargeable
batteries.
Do not operate the device with a damaged power supply cord or
a damaged mains plug.
Do not use the device if the charging cable appears to be damaged
or assembled incorrectly in order to avoid any risk of short circuiting
the battery.
Never use on a frozen or damaged battery.
The operating mode of the automatic charger and the restrictions
applicable to its use are explained later in this manual.
Fire and explosion risks!
A battery can emit explosive gases when on charge.
• During the charge, the battery must be placed in a well ventilated
area.
• Avoid flames and sparks. Do not smoke near the device.
Connection / disconnection :
• Ensure that the charger’s power supply is disconnected before
connecting or disconnecting to the battery terminals.
EN
