Gymstick RUN 3.0, User Manual

Page: 20 / 22

20
37 Screw ST4.2*20 4 75
Computer circuit
board
1
38 Computer 1 76 Screw ST2.9*6.5 12
77 Sensor 1 83
blind nuts
8
78 Lock Washer 5 2 84 Lock Washer 5 4
79
Pulse bottom wire
2
85
Speed +/1 pulse 1
80 Pulse up wire
2
86
Allen Wrench
S=13,14,15 1
81
Computer up wire 1
82 Light support 1
Trouble Shooting Guide
Fault Code Main Reason Solution
E01 The wire from computer to bottom
control board didn’t connected well
1
．
Check the connection wire between
computer and control board was well
connected.
2
．
Make sure the IC on the control board
was well inserted. If not re-insert.
3 ． Abnormal power supply in control board.
Please change a new control board.
E02 Protect the exploding
1
．
Bad contact with motor open circuit.
Please change a new motor or check the
connector.
2 ． Power tube was puncture. Please
change a new Power tube or control
board.
E05 Over current Protection
1
．
Overloaded
。
2
．
Running board with heavy resistance.
Need to be oiled
3
．
Damage in Motor. Change a new motor.
E06 Control board self-checking
E08 EEPROM damage Change the control board