6. ODOMETER:
Monitor will display the total accumulated distance.
7. PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate,
please place your palms of your hands on Both of your contact pads and the
monitor will show your current heart beat rate in beats per minute (BPM) on
the LCD after 6~7 seconds.
Remark: During the process of pulse measurement, because of the contact
jamming, the measurement value may be higher than the virtual pulse rate
during the first 2~3 seconds, then will return to normal level. The
measurement value cannot be regarded as the basis of medical treatment.
Press “MODE” button until “PULSE” appears. Press “SET” button to set
exercise pulse. The setting values of 40-240 RPM, the consumer computer
alarm when heart rate is above the SET value.
NOTE
：
1.
If the display is faint or shows no figures, please replace the batteries.
2.
The monitor will automatically shut off if there is no signal received after 4 minutes.
SPECIFICATIONS:
FUNCTION
AUTO SCAN Every 6 seconds
TIME
0:00’~99:59’
CURRENT
SPEED
0.0~999.9 KM/H
（
MILE/H
）
TRIP
DISTANCE
0.00~999.9 KM
（
MILE
）
CALORIES
0.0~999.9 CAL
ODOMETER 0.0 ~ 9999 KM
（
MILE
）
PULSE RATE 40~240 BPM
BATTERY TYPE
2pcs of SIZE –AA or UM –3
OPERATING
TEMPERATURE
0°C ~ +40°C
STORAGE TEMPERATURE
-10°C ~ +60°C
14
