11
STEP 3
(a) Attach handlebar (19) to front post. Fasten with 2 sets of flat washer (37), Allen screw
(22) and PVC cap (23).
(b) Insert hand pulse wires (20) through grommet (17) and insert through the hole in the
front post (12), pull the hand pulse wires through the hole at the top of the front post and
insert grommet (17) into the front post. Connect the hand pulse wires (20) to the
computer (18).
(c) Connect the extension sensor wire (14) to the computer (18). Then attach the computer
(18) to the front post. Fasten with 2 screws (15).
14
19
37
61
18
20
22
17
12
STEP 4
(a) Attach saddle (11) to seat post (28), tighten with a carriage bolt (67), square plate (66),
spacer (65) and lock knob (64).
(b) Remove the quick release knob (9) from the main frame and then insert seat post (28)
into main frame (1). Line up the holes and secure seat in position with knob (9). The
correct height for seat can be adjusted after the bike is fully assembled.
9
28
11
64
65
66
67
