background image

10

General Work Products LLC | 6000 Jefferson Hwy | Harahan, LA 70123

www.PalmerSafetyUS.com

•Fall Protection •Training •Netting •PPE

®

Inspection Log

SERIAL NUMBER:

MODEL NUMBER:

DATE PURCHASED:

DATE OF FIRST USE:

J

F

M

A

M

J

J

A

S

O

N

D

YR
YR
YR
YR
YR

Product lifetime is indefinite as long as it passes pre-use and Competent Person inspections. User must inspect prior to 

EACH use. Competent Person other than user must complete formal inspection annually. Competent Person to inspect and 

initial.

This inspection log must be specific to one Roof Ridge Anchor. All inspection records must be made visible and available 

to all users at all times. 

           

If equipment fails inspection or is involved in a fall 

REMOVE FROM SERVICE IMMEDIATELY

.

INSPECTION DATE

INSPECTION ITEMS NOTED

CORRECTIVE ACTION

MAINTENANCE PERFORMED

Approved by:

Approved by:

Approved by:

Approved by:

Approved by:

Approved by:

Safety Information

WARNING:

 Failure to understand and comply with safety regulations may result in serious injury or death. Regulations 

included herein are not all-inclusive, are for reference only, and are not intended to replace a Competent Person’s 

judgment or knowledge of federal or state standards.

Summary of Contents for Palmer Safety A00151













Reviews: