9
General Work Products LLC | 6000 Jefferson Hwy | Harahan, LA 70123
www.PalmerSafetyUS.com
•Fall Protection •Training •Netting •PPE
®
Maintenance, Cleaning, and Storage
If Roof Ridge Anchor fails inspection in any way, immediately remove it from service, and contact Palmer Safety to
inquire about its return or repair.
Cleaning after use is important for maintaining the safety and longevity of Roof Ridge Anchor. Remove all dirt,
corrosives, and contaminants from Roof Ridge Anchor before and after each use. If Roof Ridge Anchor cannot be cleaned
with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean Roof Ridge Anchor with corrosive
substances.
Prior to use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading
elements.
Inspection
1.) Anchor should be inspected before each use.
If any damage is found or system is involved in a fall remove from jobsite immediately.
2.) Anchor should be inspected by a Competent Person at a minimum of every 6 months.
3.) All inspections should be documented.
Palmer Safety would be glad to help with any inspections.
