Mobile NVRs M1184 / M1284 Quick Start Guide
14
Install a WiFi Module
6.
Press down and fix the
module in place by
fastening two screws.
Press
8. See the pictures below. Remove
the plastic plug exactly as the
picture below shows from the
front panel to open a hole for the
WiFi antenna. Keep the plastic
plug for necessary restoration in
the future.
Open a hole for the WiFi
antenna.
7. Have the antenna wire that
goes with the module. Connect
the antenna wire to the U.FL
connector exactly as illustrated
below.
Connect the antenna wire
to the the U.FL connector
exactly as shown.
9. Pull the other end of the
antenna wire, a SMA
connector jack, through
the antenna hole. Be sure
to meet the flat side of the
SMA jack with the flat side
of the antenna hole so the
connector jack won't get
stuck.
Arrange the flat side of the
SMA connector to meet the
flat side of the antenna hole.
Note
See the recommended antenna
wire layout as illustrated below.
It is recommended that the WiFi
antenna be pulled through an
antenna hole at the front panel.
WiFi
WiFi
3G/
4G+
GPS
GPS 3G or 4G
WiFi antenna to be pulled
through an antenna hole at
the front panel.
