3. INSTALLATION
3.5.3 Floppy Drive Connector (J23, 33-pin block)
The FDC sub-system is capable
of controlling three types of
floppy drives: 1.2, 1.44 and
2.88MB or compatible tape
drives. The connection to the
floppy drive is via a header
(J23). The floppy disk interface
includes 48mA drivers and
inputs on the drive interface.
WARNING:
When you connect a ribbon cable to this port, you must orient the
cable connector so that the PIN 1 edge of the cable is at the PIN
1 end of the onboard port as well.
3.5.4 Power Input Connector (J22, 20-pin block)
The Power Input connector
supports a standard ATX power
supply. When connecting, make
sure the lock key matches the
hook attached on a power supply
cable. The power cord should be
unplugged when you connect it.
3.5.5 Front Panel connectors (J25)
1
2
34
33
SLEEP
PWR GRN/YEL
Reset
HDD LED
Speaker