4. BIOS SETUP
Video Off Option
Determines the method of how video display enters power saving mode.
Video Off Method
Determines the manner in which the monitor is blanked.
V/H SYNC+Blank
System turns off vertical and horizontal synchronization ports
and writes blanks to the video buffer.
DPMS Support
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards Association (VESA). Use the software
supplied for your video subsystem to select video power
management values.
Blank Screen
System only writes blanks to the video buffer.
Modem Use IRQ
Enter the Interrupt that is used by the modem, if installed. Select “
NA
” if no modem is
installed
COM Ports Activity
When set to “
Enabled
”, any event occurring at a COM (serial) port will awaken a
system which has been powered down MODEM use.
LPT Ports Activity
When set to “
Enabled
” , any event occurring at a LPT (printer) port will awaken a
system which has been powered down.
HDD Ports Activity
When set to “
Enabled
”, any event occurring at a hard or floppy drive port will awaken
a system which has been powered down .
VGA Activity
When set to “
Enabled
”, any event occurring at VGA will awaken a system which has
been powered down.
