EASY INSTALLATION
The following “Easy Installation” steps are
intended for users familure with the
assembly of a computer system. For those
individuals requiring more specific
information please refer to the more
detailed descriptions located within the
latter chapters of this manual.
Note: You must keep your power cable
unplugged until the following installation
steps are completed.
Getting Start:
T
ouch a grounded metal surface to release static electricity stored in
your body before unpacking your motherboard. For details please
refer to
Precaution
section
in
Chapter 3.
Install the CPU by correctly aligning the CPU with the Socket7 as
noted in the motherboard diagram. Once aligned, press down on the
CPU gently but firmly and lock it into place. Install EDO DRAM
into the 72 pin SIMMs. See
Sec. 3.2 & Sec. 3.3.
Set CPU speed jumper in accordance to
Sec.3.2
.
A
fter completing the above steps, install any expansion Cards into
the appropriate PCI or ISA slots and screw them tight to the chassis.
See
Sec. 3.4.
P
lug in all cables included in the package EXCPET for the
power cord. See
Sec. 3.5.
Re-check all the above steps making sure each has been completed
accurately. You are now ready to plug in the power cord and turn on
the power to enter the BIOS setup,
Chapter 4.
R e l e a s e
S t a t i c E l e c t r i c i t y
C o u p l e
C o n n e c t o r s O f
H D D , F D D …
I n s t a l l A l l
E x p a n s i o n S l o t s
S e t J u m p e r s o f
C P U S p e e d
I n s e r t C P U &
R A M