Keep warm mode:
1) In standby status, press start button 3 seconds turn into keep warm mode and start heating water,
default pre-set temperature is 50 °C, press start button 1 seconds again kettle stop working and
turn in standby status.
2) Turn into keep warm mode, shall pre-set temperature first, the corresponding indicator light turn
on: if not press start button 3 seconds after set temperature, the indicator light shall turn off after
15 seconds, and kettle turn into standby status: if press start button 3 seconds after pre-set
temperature, then kettle turn in keep warm mode and start heating, corresponding indicator light
flash interval 0.5 second.
3) In keep warm mode, when the water temperature get pre-set temperature first time, kettle shall
buzz twice, and will not buzz afterwards.
4) After get pre-set temperature first time, kettle start keep warm in 30 minutes, when water
temperature below pre-set temperature, kettle start heating automatically: after 30 minutes kettle
turn into keep warm mode into standby status.
5) In keep warm mode, only corresponding pre-set temperature indicator light flash, others light off,
until keep warm stop: in keep warm process, press pre-set temperature button is invalid.
6) Keep warm temperature range is 1/+3 degree.
Description of malfunction:
A) When NTC short circuit, all the temperature indicator lights flash, kettle stop heating, buttons
cannot operable.
B) When NTC open circuit, all the temperature indicator lights turn off, kettle stop heating, buttons
cannot operable.
Warning:
1. This product is designed only for bsoiling water indoors, with other liquid filled or for other purpose
forbidden.
2. When using the product, be sure to fill with the water and then turn on the power.
3. Do not exceed Max. rated capacity when filling the water, to avoid the boiling water overflow to
cause burns. Water volume can not exceed
4. Cut off the power and then move the electric kettle; do not touch other parts of the kettle filling with
boiling water except for handle, to prevent burns.
5. In use process, do not hang the power wire near the table or similar part, to avoid any danger.
6. In order to prevent the water from eroding any internal part, do not immerse the electric kettle into
any liquid for cleaning. For details, refer to “Cleaning and descaling”.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
8. This appliance can be used by children aged from 8 years and above if they have been given
supervision or instruction concerning use of the appliance in a safe way and if they understand the
hazards involved. Cleaning and user maintenance shall not be made by children unless they are
older than 8 and supervised.