Operating Instructions:
Instructions of buzz:
1) Power-on or heating temperature reaches pre-set temperature -- buzz twice;
2) Operate buttons -- buzz once;
Instructions of pre-set temperature indicator light:
Normal mode: 50 °C, 70 °C, 80 °C, 90 °C corresponding indicator light keep shine, others light off;
Keep warm mode: 50 °C, 70 °C, 80 °C, 90 °C corresponding indicator light keep flash, others light off;
Instructions of button:
1) Start Button:
Press the start button to start heating, press it again to stop heating, Followed by Recycling.
Press the start button 3 seconds into keep warm mode; press the start button 1 seconds again to
exit keep warm mode;
2) Buttons for Temperature Pre-set:
Normal mode, the temperature indicator light turn on 50 °C → 70 °C → 80 °C → 90 °C →
(all light off at) 100 °C → 50 °C;
Keep warm mode, the temperature indicator light turn on 50 °C → 70 °C → 80 °C → 90 °C →
50 °C; When in keep warm mode the indicator light will flash, interval 0.5 seconds;
Instructions of LED on the kettle body:
1) Pre-set temperature is 50 °C -- the LED shine green; 70 °C--the LED shine blue;80 °C--LED shine
purple; 90 °C--LED shine orange; 100 °C -- LED shine red;
2) The LED turns on in the process of set temperature, heating or keep warm: When finish heating the
LED turn off;
Instructions of Working Status:
Normal mode:
1) Power on → Buzz twice → Indicator light all light up 1 second → LED on kettle body flash red,
green, blue in turn → into standby status
2) After power on, default pre-set temperature is 100 °C, Press start button to boiling directly, when
water temperature get 98 °C, kettle start timing and stop heating after 8-10 seconds, then turn into
standby status after buzz twice.
3) If not press start button after pre-set temperature, the corresponding indicator light shall turn off
after 15 seconds, and kettle turn into standby status.
4) When start heating after pre-set temperature, the indicator light turn on, after water get pre-set
temperature kettle stop heating, then buzz twice, the LED on kettle body turn off, the indicator
light still keep shine, turn into standby state after a minute. Boiling water temperature range is +3
degrees;
5) During the heating process, can set temperature through pre-set temperature button.