Cotton Swab
34
5. Particulate sensor (approximately once every two months).
Wipe the lens with a dry cotton swab periodically to remove any dirt. (Moisture or
tobacco smoke residue may cause it to no longer work properly). First remove the
particulate sensor cover, use a dry cotton swab to wipe the lens.
-Do not insert the cotton swab into any area other than the lens.
-Be sure to unplug the power cord.
-If you are unable to see clearly, please use a light.
※
Friendly Reminders:
-Before cleaning and maintenance, unplug the power cord.
-Do not operate the machine in absence of a filter. It will not be able to remove
the dust. Dust taken into the machine may cause malfunction.
-When not using the machine for a long period of time, please unplug it. Power is
also consumed while in standby mode.
-You may need to replace filters sooner depending on where and how you use the
appliance (such as a household with a large smoking population or areas with
higher air pollution). Replace the filter if filtration is not noticeable.
33
Filter/Dust Sensor/Anion Producer
Cleaning and Maintenance
1. Pre-filter (approximately twice per month)
-
Clean the surface of the filter with a vacuum cleaner or wash with
water. Allow to dry thoroughly.
2. Cellular -Activated Carbon, cold catalyst filter (approximately once
every two months)
-
Clean the dust from the front of the filter with a vacuum cleaner.
-Place the filter in a ventilated area, this will allow harmful gasses
and germs to dissipate. Do not place under too much sun
exposure.
-The filter is delicate. Do not press too hard on the filter while
vacuuming.
-Do not use water to clean this filter.
3. Antibacterial cotton, HEPA filter (approximately once every two months)
-
Place the filter in a ventilated area, this will allow harmful
gasses and germs to dissipate. Do not place under too much sun
exposure.
-Do not use water to clean this filter.
4. Anion producer cleaning and maintenance.
-
When you hear the machine produce a creaking sound,
use a #1 or #2 paintbrush as a cleaning tool. Insert the
brush from the ventilation window above the anion
emission head.
Regularly clean the dust all aroundthe emission head.
Pinsel
Fresh Air Healthy Life
ENG
