24
Prepare for humidification
1. Pull the water tank out
from the side of the
purifier.
2. Remove the package
of the humidifying
filter.
3. Put the humidifying
filter into the water
tank.
4. Open the rubber lid of
the inlet.
5. Add about 1L cold water
through the inlet, filling
around 80% of the water
tank.
6. After adding water, close
the lid.
7. Push the tank back into the
purifier.
8. This machine has
evaporative humidifying
function.
23
2. Installing the filter and front cover.
A. There are differences between the inside and the
outside of the dust filter 1 (antibacterial cotton
filter and HEPA filter). Attention: The side with a
handle should be placed outwards
B. There are differences between the inside and the
outside of the absorption filter 2 (Cellular -Activated
Carbon Filter and cold catalyst filter).
Attention: The side with a handle should be placed
outwards
C. There are differences between the inside and the
outside of the front filter (pre-filter). Attention: The
side with a handle should be placed outwards
D. Install the front cover
※
The machine will not run if the front panel is uncovered.
Fresh Air Healthy Life
ENG
