26
When the machine is on, pressing "negative ion" button will turn on
negative ion mode, and pressing one more time will turn it off. (The
icon will stay on when the machine operates in negative ion mode,
otherwise it will be off.)
Negative Ion
When the machine is on, pressing "sterilization" button will turn on UV
sterilization mode, and pressing one more time will turn it off. (The
icon will stay on when the machine operates in sterilization mode,
otherwise it will be off.)
Sterilization
Reset
This machine has a regular reminding function of filter replacement,
which works every 320 hours and 1500 hours. After every 320 hours,
the indicator light on the panel will flash to inform users to clean the
filter No.1. After cleaning, press the "reset" button for 5 seconds, then
the light will stop flashing. After every 1500 hours, the indicator light
will stay on to inform users to renew the filter No.2 and No.3. At that
time, press the button for 5 seconds so that the timing can be reset.
The second function of the "reset" button: When the machine is on,
press this button and the total working time will be shown in hours on
the screen. This equals a check of working time. Since the screen can
only display three figures, the thousands digit will be displayed first,
then hundreds, tens and single. Please Power read them together.
Sleeping
When the machine is on, it will turn to sleeping mode 5 seconds after
the "sleeping" button being pressed. In sleeping mode, all the lights
turns off and the machine works at the first gear. Press any button to
wake it up and then press "sleeping" button to quit sleeping mode, or
press "wind speed" button or smart button to quit after waking it up.
25
If water is added into the water tank, the machine will generate steam
automatically. The humidification effect is related to the wind speed, and it works
better when the machine is operating at a higher gear. If the water level becomes
low, the indicator light will flash while the machine continues working normally. If
the water tank is taken out, the indicator light will stay on, and the machine will stop
working.
Function Description
1. Powering On
Power
When the machine is plugged in and on standby, "power" button
works to turn on the machine. After this button being touched for the
second time, the machine turns to standby state. (The icon is red when
standby and green when on.)
2. Selecting the Operating Mode
Auto
When the machine is on, after "auto" button being touched, negative
ion generator and germicidal lamp will start to work, and the gear will
be changed according to sensor's data. (The icon will stay on when the
machine operates in auto mode, otherwise it will be off.) Attention: If
users change "wind speed" under auto mode, the machine will quit
this mode automatically.
Relations Between the Gear and PM2.5 Data
Gear
PM2.5 Data
1
0-50
2
50-80
3
80-100
4
100-120
5
120-140
6
140-160
7
160-300
8
300-500
Light Color
Yellow
Red
Green
Blue
Timing
When the machine is on, every touch of "timing" button will add 1
hour to the timing. When it accumulates to 12 hours, one more touch
will turn it off.
(The icon will stay on when the machine operates in timing mode,
otherwise it will be off.)
Gear
PM2.5 Data
Light Color
Child-Lock
When the machine is on, touch "child-lock" button to lock all the
buttons. At that time all the buttons have no reaction to any touch,
while the machine still works how it is set before. Press "child-lock"
button for 5 seconds and the machine will quit this mode. (The icon
will stay on when the machine operates in child-lock mode, otherwise
it will be off.)
Fresh Air Healthy Life
ENG
