EN
Page | 25
14.1
Cleaning / replacing the
motor protection filter
•
Open the vacuum cleaner cover
using the lock.
•
First remove the vacuum cleaner
dust bag and then the protective
grille of the motor filter.
•
Replace the motor filter and
replace the protective grille and
the vacuum cleaner dust bag.
RISK OF INJURY!
Improper use of the vacuum cleaner can
lead to injuries.
Switch off the vacuum cleaner and
disconnect the mains plug from the
socket before any cleaning or
maintenance.
NOTE!
Switch off and unplug the appliance
before cleaning. For optimal use of the
appliance and to ensure a longer service
life, regularly empty the container and
clean its filters.
•
Do not immerse the motor unit,
plug or mains power cable in
water or any other liquid (clean
only with a dry cloth).
•
Regularly clean the brushes and
nozzles.
•
Use water and a sponge lightly
soaked in a liquid detergent, then
rinse thoroughly and dry. Do not
use steel wool or abrasive
products.
•
If the appliance is not used for a
long period of time, it must be
covered and placed in a dry place,
in an upright position. The
appliance can be carried by the
handle on the motor unit. It is
recommended to put it back in the
original packaging to protect it
from dust and moisture.
•
If the appliance is not going to be
used, take it out of service,
disconnect the mains power cable
from the power supply and secure
all parts that pose a risk to playing
children.
CAUTION
ATTENTION
