CMG-3TB
3.3 Assembling the winch
If required, Güralp Systems can provide a winch suitable for installing
a borehole sensor. The winch and tripod are supplied as a set of parts
which you can assemble on site:
There are two sections for each leg of the tripod. The upper sections
are pre-attached to the head of the tripod; the lower sections are
supplied detached.
1. Slide the lower sections all the way into the head with the
retaining tape loops facing outwards.
2. If you are working on a surface of
sand or soil, rotate the feet so
that the points face downwards (left). For
rock or other hard
surfaces, ensure the pads face downwards (right).
36
Issue C
