Guntermann & Drunck DVI-Vision-IP, Installation And Operating Manual

Page: 109 / 148

Configuration
G&D DVI-Vision-IP · 32
English
Configuration settings
Changing hotkeys
If many applications that use hotkeys are operated on one computer or if different
KVM devices are used in one cascade, the number of available hotkeys might be
restricted.
In case an application or another device used within the cascade use the same hot-
key, the hotkey can be changed.
How to change the current hotkey:
NOTE:
Select your desired key or key combination from the keys Ctrl , Alt , Alt Gr ,
Win or Shift .
OS
D 1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under Modifier , select at least one of the listed hotkey modifiers by selecting
the box with the arrow keys. Press F8 to confirm your selection:
Ctrl  Ctrl key ( default )
Alt  Alt key
Alt Gr  Alt Gr key
Win  Windows key
Shift  Shift key
5. Press F2 to save your settings.
Config
Panel
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. In the Hotkey modifier field of the Configuration section, select at least one of the
listed modifier keys ( Ctrl , Alt , Alt Gr , Win or Shift ) by marking the corre-
sponding check box.
5. Click on Save .