Guntermann & Drunck DVI-Vision-IP, Installation And Operating Manual

Page: 81 / 148

The DVI-Vision-IP series
G&D DVI-Vision-IP · 4
English
The DVI-Vision-IP series
KVM extenders of the DVI-Vision-IP series consist of a computer module and a user
modules.
Connect the computer to be operated as well as an optional console to the computer
module ( DVI-Vision-IP-CPU ). The remote console is connected to the user module
( DVI-Vision-IP-CON ).
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.
Both the computer and the user module are connected via category 5e (or better)
twisted pair cables over an IP-based Gigabit Ethernet.
Signals of keyboard, mouse and DVI video of the computer connected are transmit-
ted using these cables and enable you to operate the computer remotely.
Use as extender or matrix switch modules
You can use the modules as either extender or matrix switch modules:

Extender modules: Configure a KVM-over-IP connection between the computer
and the user module. The configured connection between the modules is restored
each time the modules are restarted.

Matrix switch modules: In combination with the IP matrix switch ControlCenter-IP ,
you can use the modules as end devices of the matrix switch.
In this case, configure a KVM-over-IP connection to the IP matrix switch for the
modules.
In this configuration, the IP matrix switch enables the flexible connection of a user
module to a computer module.
IMPORTANT:
Data transmission of devices of the IP series is not compatible to
G&D devices of other series!
NOTE:
You can also use a cable to establish a direct connection between computer
module and user module.