Size of the heating zone
(mm)
Minimum size of cooking vessel
(diameter, mm)
160
120
180
140
210
160
Using an induction hob
Starting the cooking process
•
When the appliance is switched on, one beep sounds, all the indicator buttons light up
for 1 second, then go out to indicate that the appliance is in standby mode.
1. Touch the ON / OFF switch, all indicators will show "-".
2. Place a cookware suitable for use on the heating
zone. Make sure that the bottom of the cooking
vessel and the surface of the heating zone are clean
and dry.
3. When the heating zone temperature selection
button is touched, the indicator light next to the
button will flash.
4. Select the desired heating level by touching the power selection slider.
•
If you do not select the heating level within 1 minute, the induction hob will switch off
automatically. You will need to start over from step 1 again.
•
You can change the power level settings at any time during cooking.
12