18
6.2.1
COSTUMERMENU
BS-03
Ash empty ...................................
after cleaning the Ash the choose the Menüpoint and confirm with „YES“ and „OK“
Ash warning ................................
hours to the new „Ashewarning“ after confirmation of the Function „Ash emptiing“
1)
*
Freigabe HKR .......................
Setting of the long-distance line release on the external heating circuit controller.
m³ set Counter to 0......................
turns the m³ Counter to 0
Attitude m³ Counter .....................
influenced the numberspeed (high Value = quicker count)
fill the spiral .................................
manueal refill of Stokerchannel (stopps automatically)
fill the suction construction ..........
manual refilling of storing tank (is stopping automatically)
Charge lock time .........................
no refilling with storingtank while the OFF time (excepted forcefilling)
2)
Mode ...........................................
Combustion mode setting
Language ....................................
attiude of countries specific language
** Boiler´s off time .....................
no heating operation during programmed blocking times
Filter ash emptied ........................
Select the menu after emptying the filter ash and confirm with YES and OK.
Ash warning filter .........................
Hours until the next ash warning on the display / the filter ash must be emptied.
3)
Filter operation ............................
Affects filter performance.
Clean filter ...................................
Manual start of the filter cleaning – the boiler switches to run-on mode.
back to the Costumerlevel .......................
see Chapter 6.2
INFO
*
The button is only visible when programming trunk line operation = LAP.
**
The button is only visible if the HP0 output is programmed to None or Z-pump.
1)
Auto
........................ The pipeline pump is controlled fully automatically.
Off
........................... The pipeline pump is switched off.
Permanent
.............. The pipeline pump runs continuously.
2)
No
............................ Default setting
ECO-ideal
................ Saving mode
Normal
.................... Attitude needs more cleaning (attitude just shortly)
a lot of slag
............. Setting for heavy slag formation in the combustion chamber
3)
optimal
.................... 2-stage operation - highest performance of the filter
reduced
................... 1-stage operation - reduced filter performance
disabled
.................. Filter disabled - no filter performance