38
39
Spare parts lists and drawings can be ordered from the manufacturer or the
distributor.
5.02
Inspection – All-round
Important!
The accompanying safety chain/
strap MUST be used when a service
engineer is working under the lifting
platform.
A log should be updated annually
after the service inspection. Parts,
which are worn or defective should
be replaced with new spare parts
from Guldmann.
1. Visual check of the product
• Check the product for signs of wear and tear.
• Check the product for any faults.
• Check for any other type of damage or wear to the product.
2. Testing of the product.
• Check all the product’s functions, loaded and unloaded.
• Check that the emergency lowering works.
3. Testing of the electrical elements of the product
• Check electrical functions and signals.
• Check the wiring for faults and defects.
• Check the cable bushings.
• Check connection options connectors, etc.
• Check the seal on the control box.
4. Checking the mechanical operation of the product
• Clean dirt and other impurities from the product.
• Inspect and assess vital parts of the product.
• Replace any parts of the product, which are defective or worn.
• Check and fasten all vital parts.
• Lubricate the product.
5. Go through point 2 again, to check that everything functions
6. Did any new problems arise/were new problems noted in point 5?
• If new problems arose, go back to point 2.
• If no new problems were noted, conclude the inspection.
