14
1.04
Unpacking and preparation
Visual check of lift
Should the packaging be damaged on receipt, each part of LP12 must be
carefully examined for visible defects or deficiencies. In case of suspected
damage, do not use the lifting platform until authorised by qualified service
staff or the Guldmann Service Team.
Preparation of the lifting platform
Charge the batteries of the lifting platform, see under 1.10 on charging.
After charging, the lifting platform is ready for use.
1.05
Parts list
1. Lifting platform LP12
2. Charger
2.00
Description of functions
2.01
Labels
• Chassis number
• 24 V DC
2.02
Operation
Operation and indicator light
The lifting platform will be switched on automatically when one of the buttons
on the control panel is pressed. The green indicator light is switched on when
the lifting platform is being used. The yellow or red indicator light will be
switched on 10 to 15 seconds after the last lift has been carried out to indicate
that the lifting platform is to be recharged.
Working the lifting platform
Unlock the lifting platform with a key
(pos. 1). Lift up the front edge of the
access ramp and push it towards the
back (pos. 2) of the lifting platform, thus
disengaging the lock which must be
kept during the operation of the lifting
platform.
Then raise the steering handle
and turn it 90 degrees into steering
position (pos. 3), release the brakes
(pos. 4) by pressing down the right
side of the brake pedal.
